Step-by-step method
- Prepare the surfaceWork in the shade on cool paint. Read the vehicle and product instructions. Never allow a cleaner to dry on the surface.
- Pre-wash and rinseLoosen contamination using a compatible pre-wash or foam, then rinse well before contact washing. Sand or heavy mud requires extra care.
- Wash gentlyUse automotive shampoo and a clean microfiber mitt without excessive pressure. Work section by section, usually from top to dirtier lower areas.
- Keep tools cleanRinse the mitt frequently, using a separate rinse bucket if following the two-bucket method. Keep wheel and lower-body equipment separate.
- Rinse and dryRinse off shampoo and dry using a clean, soft drying towel, avoiding dry rubbing. Direct sun increases water-spot risk.
Mistakes to avoid
- Using household dish soap as a routine car shampoo.
- Dry-wiping a heavily contaminated vehicle.
- Returning a dropped mitt or dirty towel to the paint.
Key takeaway
Careful washing reduces risk; no technique guarantees zero micro-marring.
Microfibre care and storage
Keep bodywork, glass and wheel cloths separate. Follow the towel instructions and avoid fabric softener and bleach. Keep heavily contaminated or hardened cloths off clear coat.
Technical references
VORA educational guide based on published instructions and recommendations from the manufacturers listed. The instructions for your vehicle and exact product take precedence. No result or universal safety guarantee is possible across all materials.
